Address:?

9–11 Platinum Street

Crestmead QLD 4132

Product Types:

Category 4: Medicated blocks

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing: (physical), storage and release for supply.

Date of issue:

12/01/2018

Address:?

18 Distribution Place
Seven Hills NSW 2147

Product Types:

Category 6: (Single step manufacture)

Step(s) of manufacture:

Packaging (primary, strip, blister and sachet), labelling and storage.

28/02/2020

Address:?

6D Narabang Way
Austlink Corporate Park
Belrose NSW 2085

Product Types:

Category 6

Step(s) of manufacture:

Packaging and labelling.

Address:

131 Station Road
Seven Hills NSW 2147

Product types:

Category 6

Step(s) of manufacture:

Secondary packaging, secondary labelling, storage and release for supply.

Address:

2 Blackmore Road
Smeaton Grange NSW 2567

Product types:

Category 2: Creams/lotions, ointments, gels, pastes, sprays and liquids
Category 4: Premixes (liquids) and supplements (liquids)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, wet milling, filling, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

11 Meliador Way
Midvale WA 6056

Product types:

Category 2: Pastes and powders
Category 4: Premixes

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, storage and release for supply.

Address:

19 Gantry Place
Braemar NSW 2575

Product types:

Category 2: (Non-sterile veterinary preparations except ectoparasiticides, premixes and supplements). Creams/lotions, ointments, pastes, powders, sprays and liquids
Category 4: (Premixes/ supplements) Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, pelleting, filling, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

8 Roseworthy Road
Roseworthy SA 5371

Product types:

Category 4: Premixes, supplements and custom mixes

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, storage and release for supply.

Address:

28 Durham Street
Forbes NSW 2871

Product types:

Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, granulation (pellets), pellet extrusion, packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

12 Gildea Lane
Bendigo East VIC 3550

Product types:

Category 1: Immunobiologicals (bacterial vaccines)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, bacterial fermentation, formulation including blending, aseptic filling, sterilisation (heat), microbiological reduction treatment (heat, chemical), packaging, labelling, analysis and testing (physical, chemical, microbiological, sterility test), storage and release for supply.

Address:

60 Pile Road
Somersby NSW 2250

Product types:

Category 2: (Non sterile veterinary preparations other than ectoparasiticides, premixes and supplements)—palatable ingestible chews

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, filling, packaging, labelling, blister and sachet packaging, pellet extrusion, analysis and testing (physical, chemical and endotoxin), storage and release for supply.

Address:

118 Links Avenue South
Eagle Farm QLD 4099

Product types:

Category 2: Tablets, creams/lotions, ointments, pastes, powders, sprays, liquids and suspensions
Category 3: Liquids, sprays, powders and tablets (soluble for aquarium)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, granulation, filling, packaging, labelling, blister packaging, tableting, analysis and testing (physical), storage and release for supply.

Address:

105–113 Bronte Road
Bondi Junction NSW 2022

Product types:

Category 1: Sterile products for injection

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, aseptic filling, packaging, secondary packaging, labelling, sterilisation (heat, filtration), analysis and testing (physical, chemical, endotoxin, microbiological and sterility), storage and release for supply.

Address:

28 Mareno Road
Tullamarine VIC 3043

Product types:

Category 1: Immunobiologicals

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, aseptic filling, sterilisation (heat), secondary packaging, labelling, storage and release for supply.

Address:

29 Wongajong Road
Forbes NSW 2871

Product types:

Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, pellet extrusion, storage and release for supply.

Address:

50 Wills Road
Long Point NSW 2564

Product types:

Category 1: Immunobiologicals (canine red blood cells) and immunobiologicals (canine plasma)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, selection and screening of donor animals, blood collection, plasma separation, packaging, labelling, analysis and testing (haematological), storage and release for supply.

Address:

Unit 10, 2–8 South Street
Rydalmere NSW 2116

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical, chemical and microbiological).

Address:

22 Dalmore Drive
Scoresby VIC 3179

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical, chemical, microbiological, Limulus Amoebocyte Lysate test [LAL]).

Address:

92 Antimony Street
Carole Park QLD 4300

Product types:

Category 2: Tablets, creams/lotions, ointments, pastes, powders, sprays, liquids and suspensions
Category 3: Liquids, sprays and powders
Category 4: Powders

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, filling, packaging, labelling, strip, blister and sachet packaging, tableting, tablet coating, analysis and testing (physical), storage and release for supply.

Address:

105 Norman Jones Lane
Alstonville NSW 2477

Product types:

Category 1: Immunobiologicals (tick antiserum and snake antivenoms)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, serum collection, management and immunisation of donor animals, formulation including blending, aseptic filling, sterilisation (heat and filtration), microbiological reduction treatment (heat and filtration), packaging and labelling, analysis and testing (physical), storage and release for supply.

Address:?

81–89 Buckley Grove
Moolap VIC 3220

Product types:

Category 2: Powders and liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

3 Sheppard Street
North Coburg VIC 3058

Product types:

Category 6

Step(s) of manufacture:?

Quality Assurance (QA) of raw materials, rubber insert moulding, packaging, labelling, analysis and testing (physical) and storage.

Address:

11 Northcorp Boulevard
Broadmeadows VIC 3047

Product types:

Category 6

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending (rubber compounding), rubber insert moulding, analysis and testing (physical), storage, package, labelling.

Address:

1 Baxter Drive
Old Toongabbie NSW 2146

Product types:

Category 1: Sterile products (liquids)

Step(s) of manufacture:

Formulation including blending, filling, packaging, labelling, sterilisation (heat), analysis and testing (physical, chemical, Limulus Amoebocyte Lysate test [LAL] and microbiological), storage and release for supply.

Address:

52 Antimony Street
Carole Park QLD 4300

Product types:

Category 2: Liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, bacterial fermentation, filling, packaging, labelling, sterilisation (heat), analysis and testing (physical and microbiological), storage and release for supply.

Address:

50 Antimony Street
Carole Park QLD 4300

Product types:

Category 4: Premixes

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, storage and release for supply.

Address:

66 Antimony Street
Carole Park QLD 4300

Product types:

Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

11–15 Moores Road
Glenorie NSW 2157

Product types:

Category 1: Immunobiologicals, sterile diluents

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, management of donor animals, virus cultivation, mycoplasma cultivation, bacterial fermentation, oocyst antigen production, oocyst processing formulation including blending, aseptic filling, filling, packaging, labelling, microbiological reduction treatment (heat, chemical, filtration), sterilisation (heat, chemical, filtration), freeze-drying, analysis and testing (physical, immunobiological, microbiological, oocyst counts), storage and release for supply.

Address:

55 Dulacca Street
Acacia Ridge QLD 4110

Product types:

Category 4: Enzyme supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, granulation, fermentation (bacterial and fungal), packaging, labelling, analysis and testing (physical and enzyme assay), storage, and release for supply.

Address:

Units 1–4, 2 Darnick Street
Underwood QLD 4119

Product types:

Category 6

Step(s) of manufacture:

Analysts and testing (physical, chemical, endotoxin, microbiological and sterility).

Address:

20 Jubilee Avenue
Warriewood NSW 2102

Step(s) of manufacture:

Packaging, labelling and release for supply.

Address:

2302, 30 Glen Street
Milsons Point NSW 2061

Product types:

Category 6

Step(s) of manufacture:

Release for supply.

Address:

3 Olympic Place
Kelso NSW 2795

Product types:

Category 6

Step(s) of manufacture:

Quality Assurance (QA) of packaging materials, packaging, labelling, blister packaging, secondary packaging, secondary labelling, storage and release for supply.

Address:

Unit 16, 84–92 Barnes Street
Tamworth NSW 2340

Product types:

Category 6

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, filling, packaging, sachet packaging, labelling, storage and release for supply.

Address:

11 Moores Road
Glenorie NSW 2157

Product types:

Category 1: Sterile products
Category 2: Creams, lotions, pastes, powders, granules, tablets and liquids
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, tableting, filling, aseptic filling, packaging, labelling, sterilisation (heat and filtration), microbiological reduction treatment (heat and filtration), analysis and testing (physical and chemical), storage and release for supply.

Address:

Berrybank Farm
34 Hendersons Road
Windermere VIC 3352

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (immunobiological).

Address:

119 Magowar Road
Girraween NSW 2145

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical and chemical).

Address:

Units 1–4, 36 Curtis Road
Mulgrave NSW 2756

Product types:

Category 2: Creams, lotions, ointments, gels, pastes, powders, sprays, liquids and suspensions.
Category 3: Liquids, sprays and powders
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, wet milling, filling, packaging, labelling, analysis and testing (physical), storage and release for supply

Address:

86 Waterview Close
Dandenong South VIC 3175

Product types:

Category 2: Liquids

Category 3: Liquids, pastes, sprays and powders

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical and microbiological), storage and release for supply.

Address:

CSIRO Manufacturing Flagship
CSIRO Tissue Culture Facility
Building 205B
Bayview Avenue
Clayton VIC 3168

Product types:

Category 1: Immunobiologicals (snake antivenom and tetanus antitoxin)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, aseptic filling, labelling, sterilisation (heat and filtration), microbiological reduction treatment (heat and filtration), analysis and testing (physical and endotoxin), storage and release from manufacturing only (partial release).

Address:

Unit 1, 9 Apollo Street
Warriewood NSW 2102

Product types:

Category 6: Non-sterile all dosage forms

Step(s) of manufacture:

Packaging, secondary packaging, labelling, secondary labelling, repackaging and relabelling.

Address:

5 Eden Park Drive
North Ryde NSW 2113

Product types:

Category 6

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, filling, packaging, labelling, strip, blister and sachet packaging, storage and release for supply.

Address:

14 Kingston Drive
Helensvale QLD 4212

Product types:

Category 2: Creams/lotions, sprays, liquids, gels and ointments

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling and release for supply.

Address:

103–107 Potassium Street
Narangba QLD 4504

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

52–58 Mark Street
North Melbourne VIC 3051

Product types:

Category 6:?All dosage forms

Step(s) of manufacture:

Analysis and testing (chemical and physical).

Address:

Units 3–5, 352 Macaulay Road
Kensington VIC 3031

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (microbiological).

Address:

24–26 Helen Street
Heidelberg Heights VIC 3081

Product types:

Category 2: Creams/lotions, ointments, pastes, powders and liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, storage and release for supply.

Address:

2 Rawlinson Street
O'Connor WA 6163

Product types:

Category 3: Liquids, sprays and powders

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, aerosol filling from bulk, analysis and testing (physical), storage and release for supply.

Address:

2 Cal Close
Somersby NSW 2250

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, relabelling, strip, blister or sachet packaging, dry milling, wet milling, granulation, tableting, analysis and testing (physical), storage and release for supply.

Address:

8 Warringah Close
Somersby NSW 2250

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, aseptic filling, packaging, labelling, sterilisation (heat and filtration), microbiological reduction treatment (heat and filtration), analysis and testing (physical, chemical and microbiological), storage and release for supply.

Address:

Corner of Taylor Street and Midland Highway
Epsom VIC 3551

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, bacterial fermentation, formulation including blending, aseptic filling, sterilisation (heat and chemical), analysis and testing (physical, chemical, microbiological, sterility, immunobiological, serological and haemolysin assay), packaging, labelling, storage and release for supply.

Address:

7 Centenary Road
Slacks Creek QLD 4127

Product types:

Category 1: Sterile and immunobiological products
Category 2: Creams/lotions and liquids
Category 3: Creams/lotions and liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, aseptic filling, packaging, repackaging, labelling, relabelling, analysis and testing (physical), storage and release for supply.

Address:?

16 Picrite Close
Greystanes NSW 2145

Product types:

Category 6 (Single step manufacture)

Step(s) of manufacture:

Secondary packaging, secondary/supplementary labelling, storage and release for supply.

Address:

180 Park West Drive
Derrimut VIC 3030

Product types:

Category 6

Step(s) of manufacture:

Secondary packaging, secondary/supplementary labelling and storage.

Address:

227 Walters Road
Arndell Park NSW 2148

Product types:

Category 6: Single-step manufacturer

Step(s) of manufacture:

Storage only.

Address:

41 Edison Road
Wagga Wagga NSW 2650

Product types:

Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, storage and release for supply.

Address:

6 Coronation Avenue
Kings Park NSW 2148

Product types:

Category 3: Powders
Category 4: Powders

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, sachet packaging, analysis and testing (physical), release from manufacture only, storage and release for supply.

Address:

32 Perivale Street
Darra QLD 4076

Product types:

Category 2: Liquids (topical)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, repackaging, relabelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

350 Reserve Road
Cheltenham VIC 3192

Product types:

Category 2: Liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical, chemical), repackaging, relabelling, storage and release for supply.

Address:

University of Melbourne
School of Veterinary Science
250 Princes Highway
Werribee VIC 3030

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (immunobiological).

Address:

112 Wharf Road
West Ryde NSW 2114

Product types:

Category 6

Step(s) of manufacture:

Release for supply.

Address:

7 Eden Park Drive
Macquarie Park NSW 2113

Product types:

Category 6: All dosage forms

Step(s) of manufacture:

Release for supply.

Address:

12–16 Leabons Lane
Seven Hills NSW 2147

Product types:

Category 6

Step(s) of manufacture:

Packaging, labelling, strip, blister or sachet packaging, storage and release for supply.

Address:

490–500 Wellington Road
Mulgrave VIC 3170

Product types:

Category 2: Sprays, suspensions and liquids
Category 3: Liquids and sprays
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, wet milling, filling, packaging, sachet packaging, labelling, aerosol filling from bulk, analysis and testing (physical, chemical, microbiological and antibiotic assay), storage and release for supply.

Address:

37 Lord Fury Court
Darling Downs WA 6122

Product types:

Category 2: Pastes and powders

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, storage and release for supply.

Address:

Unit F6, Building F
16 Mars Road
Lane Cove NSW 2066

Step(s) of manufacture:

Analysis and testing (chemical).

Address:

8 Rachael Close
Silverwater NSW 2128

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (endotoxin testing, antibiotic assay, sterility, chemical, physical and microbiological).

Address:

110 Merrindale Drive
Croydon VIC 3136

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical, chemical, microbiological, sterility and Limulus Amoebocyte Lysate [LAL] test).

Address:

Mountford Road
Kerang VIC 3579

Product types:

Category 4: Premixes, supplements and block licks

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, pellet extrusion, filling, packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

61–81 Clarinda Road
Oakleigh South VIC 3167

Product types:

Category 2: Liquids

Step(s) of manufacture:

Formulation including blending, filling, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

Unit 2A, 77–83 Bayfield Road
East Bayswater VIC 3153

Product types:

Category 2: Powders and liquids
Category 4: Powders and liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

Lot 13 Enterprise Street
Maryborough QLD 4650

Product types:

Category 4: Supplements (powder) and block licks

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

T/A Radpharm Scientific
53–57 Oatley Court
Belconnen ACT 2617

Product types:

Category 1: Sterile products

Step(s) of manufacture:

Formulation including blending, filling, aseptic filling, packaging, labelling, sterilisation (heat, filtration), microbiological reduction treatment (heat, filtration), analysis and testing (physical, chemical, microbiological, Limulus Amoebocyte Lysate test [LAL], storage and release for supply.

Address:

7–9 Amax Avenue
Girraween NSW 2145

Product types:

Category 2: Tablets, pellets, capsules (hard shell and soft gel), creams/lotions, ointments, pastes, powders, spray and liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, strip, blister and sachet packaging, soft gelatine capsule manufacture, tableting, pellet extrusion, capsule filling from bulk, analysis and testing (physical), storage and release for supply.

Address:

Unit 3, 30 Heathcote Road
Moorebank NSW 2170

Product types:

Category 6

Step(s) of manufacture:

Filling, packaging, labelling and storage.

Address:

18 Healey Circuit
Huntingwood NSW 2148

Product types:

Category 2: Creams/lotions, ointments, pastes, powders, pellets, sprays, tablets, bolus and liquids
Category 3: Liquids, sprays and powders
Category 4: Premixes, supplements and probiotics

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, granulation, filling, packaging, labelling, pellet extrusion, tableting, analysis and testing (physical), secondary packaging, secondary labelling, relabelling, storage and release for supply.

Address:

Building 1, 19–23 Paramount Road
West Footscray VIC 3012

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (chemical).

Address:

91–105 Harpin Street
Bendigo East VIC 3550

Product types:

Category 1: lmmunobiologicals and sterile products

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, bacterial fermentation, virus cultivation, formulation including blending, aseptic filling, filling, packaging, labelling, sterilisation (heat, and filtration), microbiological reduction treatment (filtration), freeze drying, analysis and testing (physical, chemical, sterility test, serological, immunobiological and microbiological), storage and release for supply.

Address:

110 Merrindale Drive
Croydon VIC 3136

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, filling, packaging, labelling, blister and sachet packaging, tableting, tablet coating, capsule filling from bulk, freeze drying, storage and release for supply.

Address:?

45 King Road
Hornsby NSW 2077

Product types:

Category 2: Creams / lotions, ointments, gels, pastes, sprays and liquids (oral and topical)

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, analysis and testing (chemical and microbiological) packaging, labelling, storage and release for supply.

85 Gardiner Street
Rutherford NSW 2320

Category 1: Sterile products
Category 2: Tablets, creams/lotions, ointments, pastes, powders, sprays, liquids and suspensions
Category 3: Liquids, pastes, suspensions, sprays and powders

Quality Assurance (QA) of raw materials, chemical synthesis, formulation including blending, granulation, wet milling, dry milling, filling, aseptic filling, packaging, labelling, strip, blister or sachet packaging, tableting, tablet coating, sterilisation (heat and filtration), microbiological reduction treatment (heat and filtration), analysis and testing (physical, chemical, microbiological, sterility and endotoxin testing), storage and release for supply.

Address:

61 Chivers Road
Somersby NSW 2250

Product types:

Category 2: Tablets, pastes, liquids and suspensions.

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, filling, packaging, labelling, tableting, analysis and testing (physical and chemical),and storage.

Address:

21 Reaghs Farm Road
Minto NSW 2566

Product types:

Category 2: Tablets, capsules, creams and lotions, liquids
Category 3: Liquids and powders
Category 4: Premixes

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, tableting, tablet coating, capsule filling from bulk, analysis and testing (physical, chemical and antibiotic assay), storage and release for supply.

Address:

2806 Ipswich Road
Darra QLD 4076

Product types:

Category 1: Vaccine (low bio-burden processing)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, cell propagation, virus cultivation, bacterial fermentation, low bioburden filling, packaging, labelling, microbiological reduction treatment (heat, filtration, chemical), freeze drying, analysis and testing (physical, chemical), release for supply, storage.

Address:

1 Petcare Place
Wodonga VIC 3690

Product types:

Category 2: Palatable ingestible chews

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, filling, packaging, labelling, strip, blister or sachet packaging, microbiological reduction treatment (heat), analysis and testing (physical), storage and release for supply.

Address:

29–33 Rowland Street
Slacks Creek QLD 4127

Product types:

Category 1: sterile products
Category 2: Tablets, powders, granules, sprays, liquids and gels
Category 3: Liquids, sprays and powders
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, filling, packaging, labelling, tableting, aseptic filling, granulation, sterilisation (heat and filtration), wet milling of powders, microbiological reduction treatment (filtration, heat and chemical), analysis and testing (physical and chemical), storage and release for supply

Address:

29–33 Rowland Street
Slacks Creek QLD 4127

Product types:

Category 6: (Single step manufacture)

Step(s) of manufacture:

Storage and release for supply.

Address:

Buildings 8 & 10
56 Smith Road
Springvale VIC 3171

Product types:

Category 2: Liquids (methoxyflurane only)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, chemical synthesis, filling, packaging, labelling, secondary packaging, secondary/supplementary labelling, storage and release for supply.

Address:

12–16 Janine Street
Scoresby VIC 3179

Product types:

Category 2: Chocolate-based solid dosage forms

Step(s) of manufacture:

Formulation including blending, filling, packaging, labelling, strip, blister or sachet packaging, analysis and testing (physical and chemical), storage and release for supply.

Address:

6–8 England Street
Dandenong VIC 3175

Product types:

Category 6

Step(s) of manufacture:

Wet milling of powders, dry milling of powders.

Address:

10 Activity Street
Warwick QLD 4370

Product types:

Category 2: Tablets, creams/lotions, ointments, pastes, granules, powders, sprays, liquids, gels and suspensions

Category 3: Liquids, pastes, sprays, powders and collars
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling of powders, wet milling, granulation, tableting, filling, packaging, labelling, strip, blister or sachet packaging, analysis and testing (physical and chemical—pH only), storage and release for supply.

Address:

Unit 4, 4 Skyline Place
Frenchs Forest NSW 2068

Product types:

Category 6

Step(s) of manufacture:

Secondary packaging, secondary labelling and release for supply.

Address:

47 Heathcote Road
Moorebank NSW 2170

Product types:

Category 6:?All dosage forms

Step(s) of manufacture:

Secondary packaging, secondary labelling, storage and release for supply.

Address:

22B Hanson Place
Eastern Creek NSW 2766

Category 6: All dosage forms

Secondary packaging, secondary labelling, storage and release for supply.

Address:

1/61 Centennial Circuit
Byron Bay NSW 2484

Product types:

Category 1: Immunobiologicals (tick antiserum)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, management and immunisation of donor animals, serum collection, formulation including blending, aseptic filling, packaging, labelling, sterilisation (heat and filtration), microbiological reduction treatment (chemical and filtration), analysis and testing (physical), storage and release for supply.

Address:

112A Albatross Road
Nowra NSW 2541

Product types:

Category 2: Creams, lotions, ointments, pastes and liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

71 Colebard Street West
Acacia Ridge QLD 4110

Category 6: all dosage forms

Secondary packaging, secondary labelling, storage and release for supply

Unit 4, 25–37 Huntingdale Road
Burwood VIC 3125

Category 6

Quality Assurance (QA) of raw materials, packaging materials, storage and release for supply.

17 Woosters Lane
Nabiac NSW 2312

Category 4: Premix (powder), supplement (powder) and probiotics

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, storage and release for supply.

Address:

33 Manton Street
Morningside QLD 4170

Product types:

Category 4: Supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical), compression of lick blocks, storage and release for supply.

Address:

26 Howitt Avenue
Bairnsdale VIC 3875

Product types:

Category 1: Immunobiologicals (snake antivenom, tetanus antitoxin and equine plasma products)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, blood collection, plasma separation, management and immunisation of donor animals, selection and screening of donor animals, labelling, analysis and testing (physical, chemical, serological, immunobiological, haematological, sterility (plasma), mouse bioassay for potency and endotoxin), storage and release for supply.

Address:?

Factory 2, 3 Bray Street
Hastings VIC 3916

Product types:

Category 2: (Non-sterile veterinary preparations other than ectoparasiticides, premixes and supplements)—powders and liquids
Category 3: (Ectoparasiticides)—liquids and powders
Category 4: (Premixes and supplements)—premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, dry milling, packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

Unit 4, Century Estate
476 Gardeners Road
Alexandria NSW 2015

Product types:

Category 1: Sterile products
Category 2: Powders
Category 4: Therapeutic pet foods

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, pellet extrusion, filling, aseptic filling, packaging, labelling, sterilisation (heat and filtration), microbiological reduction treatment (heat, chemical and filtration), analysis and testing (physical and chemical), storage and release for supply.

Address:

19–25 Khartoum Road
Macquarie Park NSW 2113

Product types:

Category 1: Subcutaneous implants (terminally sterilised), subcutaneous implants (low-bioburden processing) and freeze dried peptides (low-bioburden processing).

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, physico-chemical conditioning, formulation including blending, dry milling, granulation, freeze-drying, tableting, pellet extrusion, low bioburden filling, packaging, sachet packaging, labelling, analysis and testing (physical, chemical), storage and release for supply.

Address:

4 Corporate Boulevard
Bayswater VIC 3153

Step(s) of manufacture:

Analysis and testing (physical and chemical).

Address:

914 Croobyar Road
Milton NSW 2538

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, granulation, filling, packaging, labelling, tableting, pellet extrusion, capsule filling from bulk, analysis and testing (physical), storage and release for supply.

Address:

19 Orion Road
Lane Cove West NSW 2066

Product types:

Category 1: Sterile products (liquids)
Category 2: Liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, sterilisation (heat), storage and release for supply.

Address:

1/7–10 Denoci Close
Wetherill Park NSW 2164

Product types:

Category 6

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, labelling, relabelling, storage and release for supply.

Address:

6 Distribution Drive
ORCHARD HILLS NSW 2748

Product types:

Category 6: All dosage forms

Step(s) of manufacture:

Quality assurance (QA) of raw materials, labelling, relabelling, storage and release for supply.

Address:

Unit 3, 46 Buffalo Road
Gladesville NSW 2111

Product types:

Category 2: Liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, microbiological reduction treatment (chemical), analysis and testing (physical and chemical), storage and release for supply.

Address:

'Rigby', 6066 Cunningham Highway
Kalbar QLD 4309

Product types:

Category 1: Immunobiologicals (plasma products and canine red blood cells (RBC))

Step(s) of manufacture:

Quality assurance (QA) of raw materials, plasma collection via plasmapheresis machine, blood collection, management and immunisation of donor animals, aseptic filling, packaging, labelling, microbiological reduction treatment (filtration), analysis and testing (physical, sterility, serological, immunobiological, and haematological), storage and release for supply.

Address:

T/A Conmac Laboratory Services
6 Glasson Drive
Bethania QLD 4205

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical, chemical, antibiotic assay and microbiological).

Address:

6 Elliott Road
Dandenong VIC 3175

Product types:

Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, filling, packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

Unit 4/127 Magowar Road
Girraween NSW 2145

Product types:

Category 6

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, repackaging, relabelling, secondary/supplementary labelling, storage and release for supply.

Address:

152 Enterprise Drive
Beaudesert QLD 4285

Product types:

Category 2: Powders, granules and poultice
Category 4: Premixes (liquids and powders) and supplements (liquids and powders)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, storage and release for supply.

Address:

10–12 Green Street
Banksmeadow NSW 2019

Product types:

Category 2: (Non-sterile veterinary preparations other than ectoparasiticides, and premixes and supplements)—powders and liquids
Category 3: (Premixes and supplements)—supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, storage and release for supply.

Address:

7–11 Burr Court
Laverton North VIC 3026

Product types:

Category 6

Step(s) of manufacture:

Filling, packaging, labelling, storage and release for supply.

Address:

2 Swettenham Road
Minto NSW 2566

Product types:

Category 6

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, labelling, storage and release for supply.

Address:

34–48 Webb Drive
Bohle QLD 4818

Product types:

Category 4: Supplements (blocks and licks)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:?

70–80 Bald Hill Road
Pakenham VIC 3810

Product types:

Category 6

Step(s) of manufacture:

Storage and release for supply.

Address:

1 Grandis Court
Cashmere QLD 4500

Product types:

Category 6: (Single step manufacture)

Step(s) of manufacture:

Analysis and testing (physical and chemical).

Address:

Unit 2, 12 Blackmore Road
Smeaton Grange NSW 2567

Product types:

Category 2: Liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

Unit 4, 26 Kent Road
Mascot NSW 2020

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, labelling, storage and release for supply.

Address:

6/22 Mavis Court
Ormeau QLD 4208

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical and chemical).

Address:

A/G AS Trustee for Chem-Chrom Laboratories and Services
Unit 15, 10–12 Montore Road
Minto NSW 2566

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical, chemical and microbiological).

Address:

39–79 Poplar Road
Parkville VIC 3052

Product types:

Category 1: Immunobiologicals and sterile products

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, aseptic filling, packaging, labelling, freeze drying, sterilisation (filtration), microbiological reduction treatment (filtration), analysis and testing (physical, chemical, endotoxin, microbiological, sterility testing, serological, immunobiological) and storage.

Address:

18–20 King Street
Blackburn VIC 3130

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (microbiological and sterility test).

Address:

Unit C2 Regents Park Estate
391 Park Road
Regents Park NSW 2143

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (microbiological).

Address:

Southern Cross Plant Science Analytical Services
Level 3, T-Block
Military Road
Lismore NSW 2480

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical, chemical, metals).

Address:

10–12 Church Street
Moorebank NSW 2170

Product types:

Category 2: Tablets, pellets, capsules, capsules (soft gelatine), creams/lotions, ointments, pastes, powders, liquids and suspensions
Category 4: Premixes, supplements and probiotics

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling of powders, wet milling of powders, granulation, filling, packaging, labelling, strip, blister or sachet packaging, soft gelatine capsule manufacture, tableting, tablet coating, capsule filling from bulk, analysis and testing (physical, chemical and microbiological), storage and release for supply.

Address:

T/A Inline Cosmetic Laboratories
28 Horizon Drive
Beenleigh QLD 4207

Product types:

Category 2: Creams/lotions, ointments, pastes, sprays and liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

Biosecurity Sciences Laboratory
39 Kessels Road
Coopers Plains QLD 4108

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (serological, immunological, virological (vaccine potency and purity testing).

Address:

Tick Fever Centre
280 Grindle Road
Wacol QLD 4076

Product types:

Category 1: Immunobiologicals

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, management and inoculation of donor animals, blood collection, formulation including blending, aseptic filling, filling, packaging, labelling, sterilisation (heat and filtration), microbiological reduction treatment (heat and filtration), analysis and testing (physical, sterility, microbiological, serological and other pharmacological test), storage and release for supply.

Address:

5 Widemere Road
Wetherill Park NSW 2164

Product types:

Category 6

Step(s) of manufacture:

Sterilisation (radiation and gas).

Address:

160 South Gippsland Highway
Dandenong VIC 3175

Product types:

Category 6

Step(s) of manufacture:

Sterilisation (radiation).

Address:

180–186 Potassium Street
Narangba QLD 4504

Product types:

Category 6

Step(s) of manufacture:

Sterilisation (radiation).

Address:

192 Dalwood Road
Alstonville NSW 2477

Product types:

Category 1: Immunobiologicals (tick antiserums) and immunobiologicals (snake antivenoms)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, management and immunisation of donor animals, serum collection, formulation including blending, aseptic filling, packaging, labelling, sterilisation (heat, filtration), microbiological reduction treatment (heat, filtration), analysis and testing (physical), storage and release for supply.

Address:

185 Allambie Road
Allambie Heights NSW 2100

Product types:

Category 6

Step(s) of manufacture:

Secondary packaging, secondary/supplementary labelling, storage and release for supply.

Address:

52 Brandl Street
Eight Mile Plains QLD 4113

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (chemical).

Address:

2 Sirius Road
Lane Cove West NSW 2066

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical, chemical and microbiological).

Address:

27 Healey Road
Dandenong VIC 3175

Product types:

Category 1: Sterile products
Category 2: Creams/lotions, ointments, pastes, powders and liquids
Category 3: Liquids
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, aseptic filling, wet milling, packaging, labelling, repackaging, relabelling, microbiological reduction treatment (filtration and heat), sterilisation (heat and filtration), analysis and testing (physical, chemical, microbiological, endotoxin and sterility testing), storage, release from manufacture only (partial release) and release for supply.

Address:

1–7 Bell Grove

Braeside VIC 3195

Product types:

Category 2: Liquids and ointments

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

19A Garema Circuit
Kingsgrove NSW 2208

Product types:

Category 2: Tablets, creams/lotions, ointments, pastes, powders, liquids, suspensions and gels

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, filling, packaging, labelling, strip, blister or sachet packaging, tableting, tablet coating, analysis and testing (physical and chemical) storage and release for supply.

Address:

Unit 76, Power Business Park
45 Powers Road
Seven Hills NSW 2147

Product types:

Category 1: lmmunobiologicals (inactivated autogenous or minor use bacterial, fungal and wart vaccines).

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, bacterial fermentation, fungal fermentation, wart tissue extraction, formulation including blending, filling, aseptic filling, packaging, labelling, sterilisation (heat, chemical and filtration), microbiological reduction treatment (heat, filtration and chemical), analysis and testing (physical, chemical, microbiological, serological and sterility testing), storage and release for supply.

Address:

37 Glendenning Road
Glendenning NSW 2761

Product types:

Category 1: Sterile products and terminally sterilised ointment
Category 2: Tablets, creams, lotions, ointments, gels, pastes, powders, sprays, granules, suspensions and liquids
Category 3: Liquids and sprays
Category 4: Supplements

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, granulation, dry milling, aseptic filling, filling, packaging (including strip, blister and sachet) labelling, tableting, sterilisation (heat and filtration), microbiological reduction treatment (heat, filtration and chemical), analysis and testing (physical, chemical and endotoxin), storage and release for supply.

Address:

250 Princes Highway
Werribee VIC 3030

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (microbiological and immunobiological).

Address:

Reproductive and Metabolic Endocrinology Laboratory
School of Science and Technology
University of New England
Armidale NSW 2351

Product types:

Category 6

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, analysis and testing (physical, chemical, pharmacological and immunological).

Address:

Unit 3, 4 Endeavour Road
Taren Point NSW 2229

Product types:

Category 2: Pastes, powders and suspensions
Category 4: Premixes—Powder, Supplements—Powder

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, storage and release for supply.

Address:

50 Webb Street
Bomen NSW 2650

Product types:

Category 2: Tablets, bolus, gels, powders, liquids and medicated seed
Category 3: Liquids and sprays

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, granulation, dry milling, vacuum drying, packaging, labelling, tableting, analysis and testing (chemical, physical and antibiotic assay), storage and release for supply.

Address:

39 Harris Street
St Marys NSW 2760

Product types:

Category 2: Pastes, powders, liquids, granules, and capsules—hard shell
Category 3: Liquids and powders
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, wet milling, dry milling, granulation, filling, capsule filling from bulk, packaging, labelling, sachet packaging, analysis and testing (physical and chemical), storage and release for supply.

Address:

41 Harris Street
North St Marys NSW 2760

Product types:

Category 1: Sterile products

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, aseptic filling, sterilisation (heat and filtration), microbiological reduction treatment (heat and filtration), packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

83 Maffra St
Coolaroo VIC 3048

Product types:

Category 2: Liquids (oral) and sprays

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, analysis and testing (physical and chemical), filling, packaging, labelling, storage and release for supply.

Address:

2152 Castlereagh Road
Penrith NSW 2750

Product types:

Category 1: Immunobiologicals and sterile products
Category 2: Liquids and suspensions

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, bacterial fermentation, formulation including blending, filling, aseptic filling, packaging, labelling, sterilisation (heat, filtration, chemical), microbiological reduction treatment (heat, chemical), analysis and testing (physical, chemical, microbiological, sterility testing, antibiotic assay, immunobiological, serological), storage and release for supply.

Address:

18–22 Denison Street
Crookwell NSW 2583

Product types:

Category 2: (Non-sterile veterinary preparations other than ectoparasiticides, premixes and supplements)—tablets, pastes, sprays, liquids, suspensions, creams/lotions, ointments, gels, granules and powders
Category 3: (Ectoparasiticides)—liquids, pastes and sprays
Category 4: (Premixes and supplements)—premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, granulation, wet milling of powders, dry milling, filling, packaging, labelling, strip, blister and sachet packaging, tableting, analysis and testing (physical and chemical) and storage.

Address:

361 Horsley Road
Milperra NSW 2214

Product types:

Category 6

Step(s) of manufacture:

Storage and release for supply.

Address:

211 Victoria Road
Dundas NSW 2117

Product types:

Category 6

Step(s) of manufacture:

Secondary packaging and secondary labelling.

Address:

Animal Health Laboratories
Department of Agriculture & Food
444 Albany Highway
Albany WA 6330

Product types:

Category 1: Immunobiologicals

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, collection and preparation of mature nematodes, antigen extraction, formulation including blending, sterilisation (heat, filtration), microbiological reduction treatment (filtration), aseptic filling, packaging, labelling, analysis and testing (physical, chemical, immunobiological), storage and release for supply.

Address:

7 Koojan Avenue
South Guildford Perth WA 6055

Product types:

Category 2: Liquids
Category 3: Liquids and powders
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (chemical and physical), storage and release for supply.

Address:

45 Poplar Road
Parkville VIC 3052

Product types:

Category 1: (Immunobiologicals and sterile products)—immunobiologicals and sterile products

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, bacterial fermentation, virus cultivation, propagation of genetically modified mammalian cells, extraction and purification of viral protein, formulation including blending, aseptic filling, filling, packaging, labelling, sterilisation (heat and filtration), microbiological reduction treatment (heat and filtration), freeze drying, storage and release for supply.